Axle Vent Hose W/Vent 1976-2001

This Is A Factory Original Axle Vent Hose With A Replacement Axle Vent Attached To Fit Your Jeep.

The Hose & Vent Will Fit Front Or Rear Axles On All Jeep Cherokees, Wranglers & CJ's From 1976-2001.

Each Differential Whether It Be  A Dana 30, 35, 44, 60 Will Have A Vent Hole Coming From The Axle.

This Hose Will Attach To The Base Vent Hole And Then Mount Up To The Frame With Our New Vent To Allow The Differential To Breathe Or Vent Properly Prevent Gear Lube From Getting Too Hot And Bubbling.

Our Factory Original Hose Is 3/16" At The Bottom Which Connects At The Axle And 5/16" At The Top Where The Vent Goes.

The Hose Is 3-1/2 Feet Long And Can Be Trimmed To Size At The Bottom Or Smaller Hole Side To Keep Hose Attached Where You Need To Without Extra Hose.

This Original Hose Is Much Thicker Than Normal To Prevent It From Kinking Up Or Melting Very Easy If Near An Exhaust Pipe.

We Have Several Dozen Of These To Sell & Once Gone Will No Longer Have These Available.

Jeep Only Installed These Hoses At The Manufacturer And Never Sold This Over The Counter.

The Dealer Will Only Cut You A Fuel Hose To Size And You Will Pay A Fortune For It And It Is Not Even Original.

If You Want This Get Them While We Still Have Some.

Save A Little If Purchasing More Than One At A Time.

FACTORY ORIGINAL HOSE PART# 53004529, J8125823

BREATHER VENT PART# J5352955

AXLE VENT HOSE KIT WITH BREATHER VENT PART# 53004529